This latest addition to the VP series of HPLC detectors features built-in validation support functions for GLP/GMP compliance. Ideal for analysis of organic acids and aqueous ions, it provides detection limits down to 1ppb F. An optional flow cell is available allowing for simultaneous detection of both ions and cations.

The CDD-10Avp is a conductivity detector used in non-suppressor type ion chromatographs or organic acid analysis systems. It has been developed for use as a detector for the LC-10Avp series. It comes equipped with VP functionality. Low noise, low drift and wide dynamic range assure proven performance of the Shimadzu VP series HPLC. Data acquired by the CDD-10Avp is transferred to the SCL system controller via an optical fibre interface and are digitally processed by workstation. By adding the optional cell (dual kit NS), a low-cost and compact non-suppressor type dual ion chromatograph, which detects anions and cations simultaneously, can be made. There are no restrictions when choosing mobile phase conditions, no worrying about competing ions or pH. Selection and adjustment of conditions can be made on a sample or analyte basis. The high degree of versatility of this non-suppressed system allows the analysis of various ions without peak broadening outside the column.

The reengineered RF-10AXL optical system provides significantly increased sensitivity, unsurpassed wavelength accuracy and reproducibility. These specifications enhance the units excitation and emission spectral scanning functions which, together with wavelength time programs, allow high sensitivity detection at trace level concentrations.

The RF-10AXL is based on a further development of the well known RF-551 and RF-10AxL. Improved signal to noise ratio (>300) for the RAMAN Peak and extended wavelength reproducibility are the main features of this instrument. For better performance the signal processing in the instrument has been improved.

New designed flow cell stand for better pressure resistance and minimise noise due to air bubbles. For safety of the system a leak sensor protect for solvent leaks.

The RF-10AXL supports several validation features (e.g. lamp energy test, counter functions and internal wavelength check) for work under strong GLP / GMP guidelines.

Thanks to Shimadzu's patented, 4-partition detector design, the RID-10A provides high sensitivity detection in 3 modes (analytical, semi-preparative & preparative) without compromising linearity. The double temperature controlled housing means you don't have to wait for hours before the detector is stable and a leak sensor protects the unit from solvent damage.

SEDERE develops, manufactures, distributes and supports SEDEX detectors, the most complete product line dedicated to LT-ELSD. As one of the originators of LT-ELSD, Sedere remains exclusively focused on this technology as a core competency.

The refractive index detector RID-10A is designed for both, analytical and preparative applications. In standard mode, flow rates up to 20 mL/min can be used. For higher flow rates a flow selection block shall be installed. The RID-10A offers short warm-up time up to baseline stability based on an improved temperature control system of the flow cell.

SEDERE develops, manufactures, distributes and supports SEDEX detectors, the most complete product line dedicated to LT-ELSD. As one of the originators of LT-ELSD, Sedere remains exclusively focused on this technology as a core competency.