The Optimal Autosampler for MS Front End LC

Ultra High Performance Liquid Chromatograph

Low Carryover Supports MS with Higher Accuracy

Low carryover is essential for high-sensitivity LC/MS/MS systems. Shimadzu autosamplers have been engineered with this in mind. The structure of the needle seal and the materials for the parts in contact with fluids have been thoroughly revised to keep sample component adsorption to the absolute minimum.
As a result, no carryover has been detected even for substances prone to adsorption.

Improved Throughput

The SIL-20AXR /20ACXR autosamplers require a mere 10 seconds (under specified conditions) for sample injection. Combine with high-speed separation columns to achieve analysis cycles of one minute or less. Using a rack changer makes it possible to significantly increase the number of samples that can be loaded at one time. In addition, refrigerated storage is available, allowing processing of samples in sequence by simply placing them in the changer after completing preparation.

Excellent Reproducibility  

20 mg/L caffeine used, n=6

 

The Nexera XR is equipped with a high-performance scale to accurately measure samples, achieving excellent reproducibility on the order of 0.2 % RSD or less, even for trace-quantity injections.

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country.
Please contact us to check the availability of these products in your country.

Top of This Page